The Skew-Fade LFO is a 3hp Analog Low Frequency Oscillator Eurorack Module capable of a plethora of waveforms, available as a DIY Eurorack Kit, PCB and Panel, or Built.
It has three rate settings ranging from 3 minutes and 30 seconds a cycle up to audio range at 20 hz. Triangle waves can be skewed between ramps and saws, and square waves pulse width can be adjusted from inverted triggers to triggers. The LFO’s unique feature is voltage controlled cross fading through the (“Fade C.V.” in) between square/shark tooth\sine waveforms provided at the “Fade Out.” All outs are also influenced by the skew knob resulting in many complicated and asymmetrical possibilities at the “Fade Out.” It can even be self patched(ie triangle or square into fade cv) for an extended pallet of waveforms. The “Fade C.V.” in expects a bipolar voltage 10vpp to fade from square to sine with the fade pot at noon position. Bicolor led provides constant display of positive and negative voltage crossings.
- Width: 3hp
- Panel Material: Aluminum
- 10vpp waveform outputs
- Reverse Power Protected
- Current Consumption: +12v: 15mA, -12v: 15mA
- Depth: 45mm
- Ships with M3 black nylon screws
Width: 3hp
Panel Material: Aluminum
10vpp waveform outputs
Reverse Power Protected
Current Consumption: +12v: 15mA, -12v: 15mA
Depth: 45mm
Ships with M3 black nylon screws
Product Overview
The Skew-Fade LFO is a 3hp Analog Low Frequency Oscillator Eurorack Module capable of a plethora of waveforms, available as a DIY Eurorack Kit, PCB and Panel, or Built.
It has three rate settings ranging from 3 minutes and 30 seconds a cycle up to audio range at 20 hz. Triangle waves can be skewed between ramps and saws, and square waves pulse width can be adjusted from inverted triggers to triggers. The LFO’s unique feature is voltage controlled cross fading through the (“Fade C.V.” in) between square/shark tooth\sine waveforms provided at the “Fade Out.” All outs are also influenced by the skew knob resulting in many complicated and asymmetrical possibilities at the “Fade Out.” It can even be self patched(ie triangle or square into fade cv) for an extended pallet of waveforms. The “Fade C.V.” in expects a bipolar voltage 10vpp to fade from square to sine with the fade pot at noon position. Bicolor led provides constant display of positive and negative voltage crossings.
- Width: 3hp
- Panel Material: Aluminum
- 10vpp waveform outputs
- Reverse Power Protected
- Current Consumption: +12v: 15mA, -12v: 15mA
- Depth: 45mm
- Ships with M3 black nylon screws
