Three + Four = Heaven. The SE-3X: a three-voice Paraphonic synth with four discrete, classic hardware filters.
Seen where the sound of success was heard, the SE-1(X)’s popularity with hit-makers, film composers and sound designers has spanned decades, and the 'X never quite rode off into the sunset. Now, it's blazing back with software sweetening and sweeping hardware refinements — innovations worthy of 30 years of rack time… and your time. Built attractively, built solidly, bringing you the bump 'n' thump and higher frequency clarity and warmth that has been the secret weapon of legends. No hardware upgrade path for '1X users (and yes we still love you), but complete and fully compatible ‘3X software for the SE-1X is available as a EPROM chip upgrade.
SPECIFICATIONS
Voices: Monophonic, with 3 note Paraphonic mode.
Audio Outputs: 1
External Audio Inputs: 1
Interface: 1 rotary encoder, 24 knobs, 20 square switches—17 illuminated, one three-way toggle (filter fuzz), one 5-way rotary switch (filter selection), power.
Main Display: 20 x 4 blue back-lit liquid crystal.
Memory: 8 banks of 99: 396 patches in ROM, 396 in RAM.
Weight: 11 lbs.
Dimensions: 3 rack spaces, 8 inches deep.
Power: 90 - 250 volts AC auto switching.
VOICE ARCHITECTURE
VCOs:
3 Voltage Controlled Discrete Analog Oscillators: OSC 1 waveforms: triangle, sawtooth, variable width square; OSC 2 waveforms: sine, sawtooth, variable width square; OSC 3 waveforms: triangle, sawtooth, variable width square. All waveforms output simultaneously. OSC 1 syncs to OSC 2, 3.
VCFs:
4 Voltage Controlled Discrete Analog Filters: SE Classic 24dB Moog®; SE Classic 24dB ARP®; SE Classic Juno/Jupiter 24dB, 12dB, and Mix modes; SE Classic 12dB Oberheim® filter incorporating Low Pass & Band Pass modes. Oberheim filter frequency range has been expanded by a whole tone.
Envelopes:
4 Multiple Stage Envelope Generators: attack, decay, sustain, release with inverting & multiple triggering. Envelope 1 fixed to filter frequency. Envelope 2 fixed to amplifier level. Envelopes 3 & 4 are assignable. ADSR speed increased from standard SE-1X.
LFOs:
3 Low Frequency Oscillators: triangle, sawtooth, reverse sawtooth, square, noise, random waveforms. One destination/amount for each LFO with key trigger, phase, clock-divisible MIDI-sync, auto-gate.
Glide:
Linear or exponential glide (portamento), auto glide.
Fuzz:
Switchable fixed value hardware amplifier overdrive for saturated distortion: 70’s (soft fuzz), 90’s (hard fuzz).
Presets:
4 factory banks, 4 designer banks: Scroggins Synquence, Infared, Diademer, PARAdizer (available 6/'21)
Faceplate:
Matte Black, high contrast 4 color black, red, blue, green, white.
Additional Features:
Noise Generator, hardware Ring Modulation, sweepable Cross Modulation.
Modulation Destinations:
LFOs 1, 2, 3: VCOs 1, 2, 3 frequency; VCOs 1, 2, 3 mix level; VCOs 1, 2, 3 pulse width; ring mod mix level; noise mix level; VCF resonance; VCF frequency; volume. Envelopes 3, 4: VCOs 1, 2, 3 frequency; VCOs 1, 2, 3 mix level; VCOs 1, 2, 3 pulse width; ring mod mix level; noise mix level; LFO 1, 2, 3 rate, depth, VCF resonance.
MIDI COMMUNICATION
MIDI Controllers:
Dynamics, modwheel, pressure, breath control: destinations & amounts include all LFO and envelope 3 destinations; bender: pitch, filter frequency. Fixed continuous & standardized (where vital) controller assignments for all key front panel controls. Receives program change, bank select, glide on/off, glide time, volume.
MIDI Specifications:
In, out and thru.
SPECIFICATIONS
Voices: Monophonic, with 3 note Paraphonic mode.
Audio Outputs: 1
External Audio Inputs: 1
Interface: 1 rotary encoder, 24 knobs, 20 square switches—17 illuminated, one three-way toggle (filter fuzz), one 5-wa
Product Overview
Three + Four = Heaven. The SE-3X: a three-voice Paraphonic synth with four discrete, classic hardware filters.
Seen where the sound of success was heard, the SE-1(X)’s popularity with hit-makers, film composers and sound designers has spanned decades, and the 'X never quite rode off into the sunset. Now, it's blazing back with software sweetening and sweeping hardware refinements — innovations worthy of 30 years of rack time… and your time. Built attractively, built solidly, bringing you the bump 'n' thump and higher frequency clarity and warmth that has been the secret weapon of legends. No hardware upgrade path for '1X users (and yes we still love you), but complete and fully compatible ‘3X software for the SE-1X is available as a EPROM chip upgrade.
SPECIFICATIONS
Voices: Monophonic, with 3 note Paraphonic mode.
Audio Outputs: 1
External Audio Inputs: 1
Interface: 1 rotary encoder, 24 knobs, 20 square switches—17 illuminated, one three-way toggle (filter fuzz), one 5-way rotary switch (filter selection), power.
Main Display: 20 x 4 blue back-lit liquid crystal.
Memory: 8 banks of 99: 396 patches in ROM, 396 in RAM.
Weight: 11 lbs.
Dimensions: 3 rack spaces, 8 inches deep.
Power: 90 - 250 volts AC auto switching.
VOICE ARCHITECTURE
VCOs:
3 Voltage Controlled Discrete Analog Oscillators: OSC 1 waveforms: triangle, sawtooth, variable width square; OSC 2 waveforms: sine, sawtooth, variable width square; OSC 3 waveforms: triangle, sawtooth, variable width square. All waveforms output simultaneously. OSC 1 syncs to OSC 2, 3.
VCFs:
4 Voltage Controlled Discrete Analog Filters: SE Classic 24dB Moog®; SE Classic 24dB ARP®; SE Classic Juno/Jupiter 24dB, 12dB, and Mix modes; SE Classic 12dB Oberheim® filter incorporating Low Pass & Band Pass modes. Oberheim filter frequency range has been expanded by a whole tone.
Envelopes:
4 Multiple Stage Envelope Generators: attack, decay, sustain, release with inverting & multiple triggering. Envelope 1 fixed to filter frequency. Envelope 2 fixed to amplifier level. Envelopes 3 & 4 are assignable. ADSR speed increased from standard SE-1X.
LFOs:
3 Low Frequency Oscillators: triangle, sawtooth, reverse sawtooth, square, noise, random waveforms. One destination/amount for each LFO with key trigger, phase, clock-divisible MIDI-sync, auto-gate.
Glide:
Linear or exponential glide (portamento), auto glide.
Fuzz:
Switchable fixed value hardware amplifier overdrive for saturated distortion: 70’s (soft fuzz), 90’s (hard fuzz).
Presets:
4 factory banks, 4 designer banks: Scroggins Synquence, Infared, Diademer, PARAdizer (available 6/'21)
Faceplate:
Matte Black, high contrast 4 color black, red, blue, green, white.
Additional Features:
Noise Generator, hardware Ring Modulation, sweepable Cross Modulation.
Modulation Destinations:
LFOs 1, 2, 3: VCOs 1, 2, 3 frequency; VCOs 1, 2, 3 mix level; VCOs 1, 2, 3 pulse width; ring mod mix level; noise mix level; VCF resonance; VCF frequency; volume. Envelopes 3, 4: VCOs 1, 2, 3 frequency; VCOs 1, 2, 3 mix level; VCOs 1, 2, 3 pulse width; ring mod mix level; noise mix level; LFO 1, 2, 3 rate, depth, VCF resonance.
MIDI COMMUNICATION
MIDI Controllers:
Dynamics, modwheel, pressure, breath control: destinations & amounts include all LFO and envelope 3 destinations; bender: pitch, filter frequency. Fixed continuous & standardized (where vital) controller assignments for all key front panel controls. Receives program change, bank select, glide on/off, glide time, volume.
MIDI Specifications:
In, out and thru.
