null

Nervous Squirrel Turbulence Eurorack Quad Trigger Disruptor Module

Nervous Squirrel

£499.00
Sorry, this item is out of stock.
In stock.

Manufacturer's description

Overview

This module is useful for adding controlled unpredictability to any source of triggers.

Use the built in clocks as a starting point, or feed it external events.

Set the various disrupting parameters, then use the main disruption knobs to dial in the wonkiness.

Plenty of CV inputs to keep everything interesting.

Features and controls

CLOCK SPEED: Sets the rate of the internal clock.

RUN/STOP: Starts and stops the internal clock.

LINK TO 1: Toggle switch to sync to the section 1 clock.

EXT CLK: Input for any source of triggers or gates.

DISRUPTION: Master control of the probablity of Deflect, Skip or Burst (see below) occurring.

CLOCK DEFLECT: Sets the amount of time by which a trigger is temporally shifted. Turn up this knob to set the maximum amount that the trigger is randomly displaced. The module monitors the trigger inputs and extrapolates a tempo which it can then use to predict when the next trigger might fall. This allows the triggers to be deflected forwards or backwards from where they would've otherwise occurred.AB CHANCE: Sets the probability of a trigger being sent to Output A or Output B. Press and hold RUN/STOP when powering up the module to change the outputs from A and B to gates instead of triggers.

ALL OUT: Main output for processed triggers.

There are also 5 CV inputs per section. When these are connected the knobs function as attenuators.

The LEDs show the status of the triggers entering and leaving each section of the module.

Technical details

  • Output level: 8V
  • Trigger time: 5ms
  • Width: 32HP
  • Depth: 34mm
  • Current: +12V 133mA / -12V 0mm

Product Overview

Manufacturer's description

Overview

This module is useful for adding controlled unpredictability to any source of triggers.

Use the built in clocks as a starting point, or feed it external events.

Set the various disrupting parameters, then use the main disruption knobs to dial in the wonkiness.

Plenty of CV inputs to keep everything interesting.

Features and controls

CLOCK SPEED: Sets the rate of the internal clock.

RUN/STOP: Starts and stops the internal clock.

LINK TO 1: Toggle switch to sync to the section 1 clock.

EXT CLK: Input for any source of triggers or gates.

DISRUPTION: Master control of the probablity of Deflect, Skip or Burst (see below) occurring.

CLOCK DEFLECT: Sets the amount of time by which a trigger is temporally shifted. Turn up this knob to set the maximum amount that the trigger is randomly displaced. The module monitors the trigger inputs and extrapolates a tempo which it can then use to predict when the next trigger might fall. This allows the triggers to be deflected forwards or backwards from where they would've otherwise occurred.AB CHANCE: Sets the probability of a trigger being sent to Output A or Output B. Press and hold RUN/STOP when powering up the module to change the outputs from A and B to gates instead of triggers.

ALL OUT: Main output for processed triggers.

There are also 5 CV inputs per section. When these are connected the knobs function as attenuators.

The LEDs show the status of the triggers entering and leaving each section of the module.

Technical details

  • Output level: 8V
  • Trigger time: 5ms