We say...
Kyle uses one of these in his system and he says it's the most expressive module he owns. It is insanely deep (97mm!) though, so please do check the depth of your case!
Manufacturer's description
Three axis performance controller with three metre retractable string.
The joystick has CV outputs for up/down and left/right, and pulling the ring varies the third CV output.
This module works well as a pair - six axes of control for two hands!
Overview
There have been a couple of these in the Nervous Squirrel 5U modular for a number of years. Always popular at parties! Patch the CV outputs to something interesting, then hand the strings to friends to explore.
Different sounds are created depending on the position of the end of the string in 3D space.
After receiving a few requests for a eurorack version, this batch was put together.
Note that by necessity the module has a depth of 97mm - please measure your case before ordering.
Features and controls
X, Y & Z RANGE: Sets the output voltage range for each axis.
X, Y & Z OFFSET: Sets the starting point for the voltage range of each axis.
X, Y & Z CONTROL: Move the joystick and pull the string to change the output voltages.
X, Y & Z INVERT: Reverses the response of each axis (direction to increase voltage becomes direction to decrease).
OUTPUTS: 3 no. CV outputs
Technical details
Width: 14HP
Depth: 97mm behind 2mm thick panel. Please check your case depth before ordering.
Current @ +12V: 22mA
Current @ -12V: 20mA
Output level: -3.3V to +10.6V depending on range and offset settings.
String length: Approximately 3m
String pull force: Around 1N to start pulling the string, 2.5N near the end of the reel.
The string doesn't require a great deal of force to pull, but make sure your modular system is suitably anchored.
- Width: 14HP
- Depth: 97mm
- Current: +12V 22mA / -12V 20mA
Product Overview
We say...
Kyle uses one of these in his system and he says it's the most expressive module he owns. It is insanely deep (97mm!) though, so please do check the depth of your case!
Manufacturer's description
Three axis performance controller with three metre retractable string.
The joystick has CV outputs for up/down and left/right, and pulling the ring varies the third CV output.
This module works well as a pair - six axes of control for two hands!
Overview
There have been a couple of these in the Nervous Squirrel 5U modular for a number of years. Always popular at parties! Patch the CV outputs to something interesting, then hand the strings to friends to explore.
Different sounds are created depending on the position of the end of the string in 3D space.
After receiving a few requests for a eurorack version, this batch was put together.
Note that by necessity the module has a depth of 97mm - please measure your case before ordering.
Features and controls
X, Y & Z RANGE: Sets the output voltage range for each axis.
X, Y & Z OFFSET: Sets the starting point for the voltage range of each axis.
X, Y & Z CONTROL: Move the joystick and pull the string to change the output voltages.
X, Y & Z INVERT: Reverses the response of each axis (direction to increase voltage becomes direction to decrease).
OUTPUTS: 3 no. CV outputs
Technical details
Width: 14HP
Depth: 97mm behind 2mm thick panel. Please check your case depth before ordering.
Current @ +12V: 22mA
Current @ -12V: 20mA
Output level: -3.3V to +10.6V depending on range and offset settings.
String length: Approximately 3m
String pull force: Around 1N to start pulling the string, 2.5N near the end of the reel.
The string doesn't require a great deal of force to pull, but make sure your modular system is suitably anchored.