Over the span, of many years we have been designing, building, prototyping, and producing reliable eurorack modular power supplies meant to protect you and your modules that found their home in many eurorack modular systems, DIY cases, professional studios, and live applications across the whole world. We are forever grateful for this one a lifetime opportunity to make our passion into a tangible reality and also for your continuous support of our designs and amazing feedback that pushes us well beyond available standard solutions. Over the years we have been asked many times by our users to provide a definite eurorack modular power supply that would be able to sustain and protect the most “busy” of setups. Behind the scenes, we were slowly prototyping and developing a brand new type of eurorack modular power supply that would provide even more stable clean power and further address many of the intrinsic topics which plague the daily eurorack modular musician.
Introducing ~ HammerPWR. Why HammerPWR you ask? It is quite simple. It packs a powerful 100W unit with an output that can supply enough juice to the most hardcore eurorack system out there. Two of these will get your eurorack modular system rig going for a lifetime.
In the beginning, we have taken our years of experience from the eurorack modular realm, industrial electronic design background, our craft, and feedback of our users to transmute it all into the strongest eurorack modular power supply meant for use in the hardest of conditions on the market featuring the highest power density money can buy. The ideal solution for the largest of systems featuring many power-hungry analog/digital modules or modules which draw a lot of current needed for their ensured smooth operation. Our system of filtered protection on the inputs and outputs of the power supply stays in place with minor tweaks to its core design making sure that your system will keep operating under hassle-free, low-noise, artifact-free conditions while also being protected from noises present in the power grid at times so your system and modules are safe and intact from external occurrences, mishaps, and influences. To ensure the lowest possible noise within your system we have used a special type of converters with low noise on their outputs and we have split the +12V / 5A power branches by 2,5A + 2,5A to further decrease inherent influence between modules. Two sets of output terminals then further elevate the stress of cables connected to the bus board for longer service life.
HammerPWR is safely + externally powered from a 120W power brick (Meanwell GST120A-P1M – sold separately ) to make sure you and your modules are safe as well under all conditions.
The small dimensions of HammerPWR make it an ideal choice for any system including skiff and DIY where depth and size can be your concern.
Easy to install push to connect system – WAGO 256 series shockproof + push to connect terminals ensure easy installation of HammerPWR within your case.
How much is my shipping?
Shipping is automatically calculated before you submit your payment information. Simply add items to your cart and proceed to the checkout page, where you'll be offered shipping options and their prices. In the UK it's normally around £4 for order values under £150, and free above that. Shipping to mainland EU is typically between £7 and £20, depending on the shipping method and the size and weight of the order.
Do you ship to my country?
Almost certainly - the site will give you an estimate of shipping costs if you add an item to the cart and then enter your country and postcode. If you have specific requirements (such as if you prefer UPS over FedEx, for example) then let us know in advance and we'll try to work something out for you.
Shipping methods
We use a combination of Parcelforce, DPD, Royal Mail and UPS for the UK, and for international orders it's either Royal Mail, UPS, DHL or FedEx depending on where you are in the world. If you have a particular preference then try to let us know BEFORE you order so we can look into it for you. Please note that there may occasionally be additional shipping charges if you live in a remote area, depending on what surcharges are applied by the shipper. We'll get in touch to discuss this with you in such cases.
Dispatch times
For UK orders, we normally dispatch the same working day if we get the order before 15:00. If you have a really urgent situation then of course drop us an email before ordering and we'll always do our absolute best to accommodate you.
For international orders, we normally dispatch the same day if we get the order before 13:00 but again, occasionally it might be the next day before we can send it out, and sometimes FedEx or UPS may come a little earlier than scheduled which would also push an order into the next day.
Shipping times
Since April 2020 the couriers we use have suspended guarantees for shipping times, so even though we're paying them for priority services - 24-48 hours for most of the world - in practice it's often an extra day on top and sometimes it can be longer.
There is absolutely nothing we can do about this unfortunately. If you are outside the UK and it's a life-or-death situation where you absolutely MUST have that passive mult for the next day then... it may be better to find a local supplier.
Saturday shipping
If you're in the UK and you order before 15:30 on a Friday then we can send something for a Saturday delivery (NB: this applies to UK mainland addresses only). The success rate with DPD is about 95% so it's worth a punt most of the time. Please note that if you select Saturday shipping on an order placed earlier in the week, we'll wait until Friday to ship it.
Pre-orders
If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.
If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch if you have questions.
Product Overview
Over the span, of many years we have been designing, building, prototyping, and producing reliable eurorack modular power supplies meant to protect you and your modules that found their home in many eurorack modular systems, DIY cases, professional studios, and live applications across the whole world. We are forever grateful for this one a lifetime opportunity to make our passion into a tangible reality and also for your continuous support of our designs and amazing feedback that pushes us well beyond available standard solutions. Over the years we have been asked many times by our users to provide a definite eurorack modular power supply that would be able to sustain and protect the most “busy” of setups. Behind the scenes, we were slowly prototyping and developing a brand new type of eurorack modular power supply that would provide even more stable clean power and further address many of the intrinsic topics which plague the daily eurorack modular musician.
Introducing ~ HammerPWR. Why HammerPWR you ask? It is quite simple. It packs a powerful 100W unit with an output that can supply enough juice to the most hardcore eurorack system out there. Two of these will get your eurorack modular system rig going for a lifetime.
In the beginning, we have taken our years of experience from the eurorack modular realm, industrial electronic design background, our craft, and feedback of our users to transmute it all into the strongest eurorack modular power supply meant for use in the hardest of conditions on the market featuring the highest power density money can buy. The ideal solution for the largest of systems featuring many power-hungry analog/digital modules or modules which draw a lot of current needed for their ensured smooth operation. Our system of filtered protection on the inputs and outputs of the power supply stays in place with minor tweaks to its core design making sure that your system will keep operating under hassle-free, low-noise, artifact-free conditions while also being protected from noises present in the power grid at times so your system and modules are safe and intact from external occurrences, mishaps, and influences. To ensure the lowest possible noise within your system we have used a special type of converters with low noise on their outputs and we have split the +12V / 5A power branches by 2,5A + 2,5A to further decrease inherent influence between modules. Two sets of output terminals then further elevate the stress of cables connected to the bus board for longer service life.
HammerPWR is safely + externally powered from a 120W power brick (Meanwell GST120A-P1M – sold separately ) to make sure you and your modules are safe as well under all conditions.
The small dimensions of HammerPWR make it an ideal choice for any system including skiff and DIY where depth and size can be your concern.
Easy to install push to connect system – WAGO 256 series shockproof + push to connect terminals ensure easy installation of HammerPWR within your case.
Technical Specs
Konstant Lab
Konstant Lab Power Brick 60W Eurorack Power Supply (GSM60)
