IO Instruments Kalyke Eurorack Dual Function Generator Module

DUAL FUNCTION GENERATOR

LFO section

Waveform:

controlled/morphed manually via potentiometer or CV. Morphs from Pulse (20-50-90%) -> Sinus (720°) -> Ramp (720°) -> Triangle (680°)

Tempo:

controlled via potentiometer or CV. Center of potentiometer at: 4Hz +/- 8 Oktaves

Repeats:

controlled via potentiometer and reset in. Can be adjusted from 1-14 repeats and endless loop (takes effect after reset in)

ADSR-Mix:

ADSR can be mixed onto LFO with potentiometer

Sample and Hold:

LFO can be switched into S&H mode

Offset:

can be toggled btw -5V to +5V and 0 to +10V via switch

Input:

1xCV for waveform, 1xCV for tempo, 1xReset

Output:

LFO has one positive and one negative CV output

Manual Trigger:

one button to reset LFO (shared with ADSR)

ADSR section

Curve:

continous exponentiell to linear response, controlled via potentiometer

Ratchets:

16 different multi repeats of attacks, controlled via Attack and Decay sliders

Loop:

loop mode from Attack to Release, controlled via switch

Freeze:

all settings get freezes to keep exact positions

Control:

4x30mm faders to control A, D, S and R segments

Manual Trigger:

one button to reset ADSR (shared with LFO)

Output:

ADSR has one positive and one negative CV output, further one trigger out at endof attack, one trigger out at end of decay

Input:

1xGate in (>1V), four modulation inputs to control A, D, S, and R segments (0-5V)

General:

• Output Amplitude: 7,5V (ADSR) / 10VPP (LFO)
• Frequency Range: LFO 60s – 284Hz /
• ADSR 0,4ms-10s (Attack); 0,8ms-20s (Decay/Release)
• Trigger out: 2ms/10V
• Width: 16 HP