Solid Felt is a stereo multimode analog filter in desktop format.
Its name comes from the etymology of the words “stereo” and “filter”.
From subtle timbral variation to an all-encompassing sonic treatment, Solid Felt can be used in multiple ways to embellish or vandalize your sound bouquet:
- As two independent mono filters
- to give a stereo treatment to a mono signal
- to filter a stereo signal at the same cutoff frequency on the L and R channels
- As a mono 24dB/oct filter (placing the two filters in series)
- To synthesize sounds, via external feedback patching
- To extrapolate a CV signal from your audio input and use it to control any of its parameter or external gear
- As a stereo overdrive effect
- To bring line level signals to eurorack level
Features:
- 2x Analog multimode analog filters
- 2x 1/4″ jack high impedance inputs
- 2x 1/4″ jack low impedance outputs
- 8x 1/8″ jack eurorack compatible CV inputs
- 8x 1/8″ jack eurorack compatible CV outputs
- Input gain control to amplify incoming signals up to fuzzy territory
- mode control to select between lowpass, bandpass and highpass filter response (CV controllable)
- an envelope follower (normalled to input A) which is fed into a three stage clock divider
- a voltage controlled LFO with waveform blend control and two outputs 180° out of phase
- a voltage controlled LFO with rising and falling sawtooth outputs
Product Overview
Solid Felt is a stereo multimode analog filter in desktop format.
Its name comes from the etymology of the words “stereo” and “filter”.
From subtle timbral variation to an all-encompassing sonic treatment, Solid Felt can be used in multiple ways to embellish or vandalize your sound bouquet:
- As two independent mono filters
- to give a stereo treatment to a mono signal
- to filter a stereo signal at the same cutoff frequency on the L and R channels
- As a mono 24dB/oct filter (placing the two filters in series)
- To synthesize sounds, via external feedback patching
- To extrapolate a CV signal from your audio input and use it to control any of its parameter or external gear
- As a stereo overdrive effect
- To bring line level signals to eurorack level
Features:
- 2x Analog multimode analog filters
- 2x 1/4″ jack high impedance inputs
- 2x 1/4″ jack low impedance outputs
- 8x 1/8″ jack eurorack compatible CV inputs
- 8x 1/8″ jack eurorack compatible CV outputs
- Input gain control to amplify incoming signals up to fuzzy territory
- mode control to select between lowpass, bandpass and highpass filter response (CV controllable)
- an envelope follower (normalled to input A) which is fed into a three stage clock divider
- a voltage controlled LFO with waveform blend control and two outputs 180° out of phase
- a voltage controlled LFO with rising and falling sawtooth outputs
