Ciat-Lonbarde Rolzer is a beat generator add-on for the Plumbutter, a drum and drama machine.
The Plumbutter offers complete voltage control of all parameters, including its pulse-rolls, for generating beat tempo patterns. However, when voltage control is added to an androgynous circuit such as the rolz, it has the tends to roll-off the ultrasound chaos present in the original incarnation of this idea, the rolz-5. So here we have the Rolzer, a collection of geometries graded into tempi by virtue of their capacitors. It is for developing a relationship and searching for the oddest, most alive rhythms, not by twiddling knobs but by making connections.
According to the concepts outlined in the Rollz-5 papers, combinations of even and odd geometries, such as a square and a triangle, generate sophisticated beat patterns including chaos at ultrasound frequencies. An even roll maintains a steady pattern, and an odd roll tries to resolve its inherent paradox; connecting them blends these attributes over time and with "grain". The original paper circuits presented each solder-worker to construct her own idiosyncratic assemblage of geometries, with assortments of capacitors based on what was on at hand, or strict dogmata, or pure whimsey. When the concept evolved into a Laboratory Rollz, the Plumbutter discarded any idiosyncrasies for the sake of pure control and dialing in aesthetic by knob. However, the Tocante line offers a way to think about the materials of electronics- capacitors- that allows a revision of the original Rolz concept.
Here we can bring back the strong sense of idiosyncrasy only offered by non-knobbed geometries, without whimsey, by collaborating with the industrial value system of capacitors, known as "E6". Basically, a ratio of ten is broken logarithmically into six gradations, and these are mapped to a sense of tempo, associating Italian quality with Industrial quantity: presto, allegro, moderato, andante, adagio, lento, and grave become modules of 1, 1.5, 2.2, 3.3, 4.7, 6.8, and 10 microfarad values.
Now, each tempo module contains an assortment of even and odd rolls. From top to bottom: hexagon, triangle, square, pentagon, and hexagon again. There are two hexagons to offer that roll's plexus for connections. Before defining the colors, review the sandrode concept- androgynous nodes that neither input nor output, but perform both functions at different times. In the rolzer, they are simply transistor neurons, with three simple actions: discharge of a capacitor, building up to a threshold, and inverted pulsing another neuron. The sandrode function is at the junction of these three, forming both a sensor and a pulse generator. The rolzer modules' majority of connections are sandrodes, represented as brown nodes. In the language of plumbutter, brown is both a hot and a cool color, so it takes both those attributes, output and input. However, sometimes you just want an output, perhaps for voltage control of a manifesting gong. So, each roll has one orange jack that yields a square wave at the tempo of the roll.
Connections may be stacked, and since all the plumbutter and rollzer outputs have a current limiting resistor, anything can go into the brown bananas. However, note that the brown bananas have no current limiting resistor; this is essential to propagate the paradox wave effect. The impedance of a brown node feels like a diode junction to ground, plus a high impedance to positive. As of 2014, I have not received any complaints of broken browns, because most sensible synthesizers have some kind of current limiting resistor on their outputs. But make note that if you have a very old Serge, you will likely already know about its own smoking modules when outputs are crossed, and that old warning would apply when patching old Surge to a brown banana. In general, the browns are meant to be patched with each other, and connected to the green inputs of plumbutter for drum machine manifestation. Likewise, orange "should" go to blue or purple. And red and gray can come back into the browns here. But experimenting really can't hurt!
How much is my shipping?
Shipping is automatically calculated before you submit your payment information. Simply add items to your cart and proceed to the checkout page, where you'll be offered shipping options and their prices. In the UK it's normally around £4 for order values under £150, and free above that. Shipping to mainland EU is typically between £7 and £20, depending on the shipping method and the size and weight of the order.
Do you ship to my country?
Almost certainly - the site will give you an estimate of shipping costs if you add an item to the cart and then enter your country and postcode. If you have specific requirements (such as if you prefer UPS over FedEx, for example) then let us know in advance and we'll try to work something out for you.
Shipping methods
We use a combination of Parcelforce, DPD, Royal Mail and UPS for the UK, and for international orders it's either Royal Mail, UPS, DHL or FedEx depending on where you are in the world. If you have a particular preference then try to let us know BEFORE you order so we can look into it for you. Please note that there may occasionally be additional shipping charges if you live in a remote area, depending on what surcharges are applied by the shipper. We'll get in touch to discuss this with you in such cases.
Dispatch times
For UK orders, we normally dispatch the same working day if we get the order before 15:00. If you have a really urgent situation then of course drop us an email before ordering and we'll always do our absolute best to accommodate you.
For international orders, we normally dispatch the same day if we get the order before 13:00 but again, occasionally it might be the next day before we can send it out, and sometimes FedEx or UPS may come a little earlier than scheduled which would also push an order into the next day.
Shipping times
Since April 2020 the couriers we use have suspended guarantees for shipping times, so even though we're paying them for priority services - 24-48 hours for most of the world - in practice it's often an extra day on top and sometimes it can be longer.
There is absolutely nothing we can do about this unfortunately. If you are outside the UK and it's a life-or-death situation where you absolutely MUST have that passive mult for the next day then... it may be better to find a local supplier.
Saturday shipping
If you're in the UK and you order before 15:30 on a Friday then we can send something for a Saturday delivery (NB: this applies to UK mainland addresses only). The success rate with DPD is about 95% so it's worth a punt most of the time. Please note that if you select Saturday shipping on an order placed earlier in the week, we'll wait until Friday to ship it.
Pre-orders
If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.
If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch if you have questions.
Product Overview
Ciat-Lonbarde Rolzer is a beat generator add-on for the Plumbutter, a drum and drama machine.
The Plumbutter offers complete voltage control of all parameters, including its pulse-rolls, for generating beat tempo patterns. However, when voltage control is added to an androgynous circuit such as the rolz, it has the tends to roll-off the ultrasound chaos present in the original incarnation of this idea, the rolz-5. So here we have the Rolzer, a collection of geometries graded into tempi by virtue of their capacitors. It is for developing a relationship and searching for the oddest, most alive rhythms, not by twiddling knobs but by making connections.
According to the concepts outlined in the Rollz-5 papers, combinations of even and odd geometries, such as a square and a triangle, generate sophisticated beat patterns including chaos at ultrasound frequencies. An even roll maintains a steady pattern, and an odd roll tries to resolve its inherent paradox; connecting them blends these attributes over time and with "grain". The original paper circuits presented each solder-worker to construct her own idiosyncratic assemblage of geometries, with assortments of capacitors based on what was on at hand, or strict dogmata, or pure whimsey. When the concept evolved into a Laboratory Rollz, the Plumbutter discarded any idiosyncrasies for the sake of pure control and dialing in aesthetic by knob. However, the Tocante line offers a way to think about the materials of electronics- capacitors- that allows a revision of the original Rolz concept.
Here we can bring back the strong sense of idiosyncrasy only offered by non-knobbed geometries, without whimsey, by collaborating with the industrial value system of capacitors, known as "E6". Basically, a ratio of ten is broken logarithmically into six gradations, and these are mapped to a sense of tempo, associating Italian quality with Industrial quantity: presto, allegro, moderato, andante, adagio, lento, and grave become modules of 1, 1.5, 2.2, 3.3, 4.7, 6.8, and 10 microfarad values.
Now, each tempo module contains an assortment of even and odd rolls. From top to bottom: hexagon, triangle, square, pentagon, and hexagon again. There are two hexagons to offer that roll's plexus for connections. Before defining the colors, review the sandrode concept- androgynous nodes that neither input nor output, but perform both functions at different times. In the rolzer, they are simply transistor neurons, with three simple actions: discharge of a capacitor, building up to a threshold, and inverted pulsing another neuron. The sandrode function is at the junction of these three, forming both a sensor and a pulse generator. The rolzer modules' majority of connections are sandrodes, represented as brown nodes. In the language of plumbutter, brown is both a hot and a cool color, so it takes both those attributes, output and input. However, sometimes you just want an output, perhaps for voltage control of a manifesting gong. So, each roll has one orange jack that yields a square wave at the tempo of the roll.
Connections may be stacked, and since all the plumbutter and rollzer outputs have a current limiting resistor, anything can go into the brown bananas. However, note that the brown bananas have no current limiting resistor; this is essential to propagate the paradox wave effect. The impedance of a brown node feels like a diode junction to ground, plus a high impedance to positive. As of 2014, I have not received any complaints of broken browns, because most sensible synthesizers have some kind of current limiting resistor on their outputs. But make note that if you have a very old Serge, you will likely already know about its own smoking modules when outputs are crossed, and that old warning would apply when patching old Surge to a brown banana. In general, the browns are meant to be patched with each other, and connected to the green inputs of plumbutter for drum machine manifestation. Likewise, orange "should" go to blue or purple. And red and gray can come back into the browns here. But experimenting really can't hurt!
Technical Specs
Shipping Details
How much is my shipping?
Shipping is automatically calculated before you submit your payment information. Simply add items to your cart and proceed to the checkout page, where you'll be offered shipping options and their prices. In the UK it's normally around £4 for order values under £150, and free above that. Shipping to mainland EU is typically between £7 and £20, depending on the shipping method and the size and weight of the order.
Do you ship to my country?
Almost certainly - the site will give you an estimate of shipping costs if you add an item to the cart and then enter your country and postcode. If you have specific requirements (such as if you prefer UPS over FedEx, for example) then let us know in advance and we'll try to work something out for you.
Shipping methods
We use a combination of Parcelforce, DPD, Royal Mail and UPS for the UK, and for international orders it's either Royal Mail, UPS, DHL or FedEx depending on where you are in the world. If you have a particular preference then try to let us know BEFORE you order so we can look into it for you. Please note that there may occasionally be additional shipping charges if you live in a remote area, depending on what surcharges are applied by the shipper. We'll get in touch to discuss this with you in such cases.
Dispatch times
For UK orders, we normally dispatch the same working day if we get the order before 15:00. If you have a really urgent situation then of course drop us an email before ordering and we'll always do our absolute best to accommodate you.
For international orders, we normally dispatch the same day if we get the order before 13:00 but again, occasionally it might be the next day before we can send it out, and sometimes FedEx or UPS may come a little earlier than scheduled which would also push an order into the next day.
Shipping times
Since April 2020 the couriers we use have suspended guarantees for shipping times, so even though we're paying them for priority services - 24-48 hours for most of the world - in practice it's often an extra day on top and sometimes it can be longer.
There is absolutely nothing we can do about this unfortunately. If you are outside the UK and it's a life-or-death situation where you absolutely MUST have that passive mult for the next day then... it may be better to find a local supplier.
Saturday shipping
If you're in the UK and you order before 15:30 on a Friday then we can send something for a Saturday delivery (NB: this applies to UK mainland addresses only). The success rate with DPD is about 95% so it's worth a punt most of the time. Please note that if you select Saturday shipping on an order placed earlier in the week, we'll wait until Friday to ship it.
Pre-orders
If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.
If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch if you have questions.