The first modules from our Eurorack Bridge system!
A pair of ADDAC213As acts as a simple one-cable bridge between different cases. By itself the ADDAC213As can send/receive 8 CV or audio signals between your cases, but can be expanded to bridge two cases for up to 24 signals at the same time.
ADDAC213A
Use a pair of ADDAC213As to send & receive 8 CV or audio signals between distant points in your case, between two separate cases, or between your case and a friend's case.??Less clatter, less spaghetti, faster connection!??There’s nothing better than being able to connect that controller skiff with just one cable to your main system. At a gig, in the studio, when jamming with a friend, give yourself a gift by grabbing a pair of ADDAC213As.??The modules can be installed in normal position or a 180 degree position to fit any need and any case design.
Expansion by the ADDAC213Bs
??Each ADDAC213A module can be connected through a ribbon cable connection on its backside with up to two ADDAC213Bs. Each ADDAC213B module added expands the channels options of the ADDAC213A by adding 8 more channels.??With two 2 ADDAC213Bs connected to each ADDAC213A module, you’ll have a total of 24 channels going between your cases with a simple one-cable bridge.??Between the ADDAC213A pair and the ADDAC213B, your cases never looked so elegantly connected together!??
The ADDAC213As are always sold as a pair of 2 modules and an included ribbon cable (50cm or 100cm ribbon cable, or custom sizes available upon request).
Each module can be installed in normal position or at 180 degrees.?
Comes with a 50cm ribbon cable. Custom sizes are available upon request.
Mechanical:
. Format: Eurorack
. Width: 6 HP
. Depth: 2.4 cm
Electrical:
Passive / Does not draw current
Ribbon Cable: 50cm or 100cm ribbon cable (custom sizes available upon request)
Dimensions
6 HP
24 mm deep
Current Draw
Module does not draw current
Product Overview
The first modules from our Eurorack Bridge system!
A pair of ADDAC213As acts as a simple one-cable bridge between different cases. By itself the ADDAC213As can send/receive 8 CV or audio signals between your cases, but can be expanded to bridge two cases for up to 24 signals at the same time.
ADDAC213A
Use a pair of ADDAC213As to send & receive 8 CV or audio signals between distant points in your case, between two separate cases, or between your case and a friend's case.??Less clatter, less spaghetti, faster connection!??There’s nothing better than being able to connect that controller skiff with just one cable to your main system. At a gig, in the studio, when jamming with a friend, give yourself a gift by grabbing a pair of ADDAC213As.??The modules can be installed in normal position or a 180 degree position to fit any need and any case design.
Expansion by the ADDAC213Bs
??Each ADDAC213A module can be connected through a ribbon cable connection on its backside with up to two ADDAC213Bs. Each ADDAC213B module added expands the channels options of the ADDAC213A by adding 8 more channels.??With two 2 ADDAC213Bs connected to each ADDAC213A module, you’ll have a total of 24 channels going between your cases with a simple one-cable bridge.??Between the ADDAC213A pair and the ADDAC213B, your cases never looked so elegantly connected together!??
The ADDAC213As are always sold as a pair of 2 modules and an included ribbon cable (50cm or 100cm ribbon cable, or custom sizes available upon request).
Each module can be installed in normal position or at 180 degrees.?
Comes with a 50cm ribbon cable. Custom sizes are available upon request.
Mechanical:
. Format: Eurorack
. Width: 6 HP
. Depth: 2.4 cm
Electrical:
Passive / Does not draw current
Ribbon Cable: 50cm or 100cm ribbon cable (custom sizes available upon request)
