null

4ms Sampler Eurorack Module

4ms

£259.00
Sorry, this item is out of stock.

Out of stock

Shipping info

Overview:
The Sampler plays stereo or mono .wav files from an SD Card with controls for Pitch (including a 1V/oct jack), Start Position, and Length.
A knob and CV jack selects the Sample to play, and the Start Position knob and CV jack control where in the sample playback will begin. The Length knob and CV jack determine how much of the sample is played back: from tiny grains, to percussive hits, to longer loops... or just the entire file.
Pressing Play or firing a trigger into the Play Trig jack will play the sample. Holding the Play button down for a second will toggle looping.
There's also a Reverse button and jack for backwards playback, and an End Out jack for synchronizing loops, or cascading sample playback with other events.
If a sample file contains cues (labels or markers), the Start Pos and Length knobs will snap to these cue points.
To record samples, hold Play and Reverse for two seconds. Press Play again or fire a trigger into the Play/Rec Trig jack to start and stop recording. Each recording will create a new stereo 48kHz 24bit .wav file in the current bank's folder. Recordings can be as long as your card has the capacity for: a 256GB card is 18 days of continuous recording (432.9 hours). Audio data is split into maximum 4GB wav files on the microSD card.
Samples are arranged into banks by placing .wav files into folders (each folder is a bank). A maximum of 10 samples can be loaded in a bank. There is a maximum of 60 banks (600 samples maximum total).
Sample files are limited to 4GB each, which is over 6 hours at 44k/16b/stereo.

  • Hundreds of samples included on microSD card
  • Extremely quiet, low noise and low jitter design
  • Stereo or Mono output
  • Play button/trigger jack: Tapping the button or receiving a trigger starts/re-starts the sample
  • Sample CV/knob: select which sample within the channel's bank
  • Pitch CV and Pitch knob: playback pitch (-10 to +4 octave range)
  • Start Pos CV/knob: position in the sample to begin playback (loop start point)
  • Length CV/knob: playback time (loop end point)
  • Length knob at max: entire file is played
  • Length knob 50%-99%: 200ms - 5s of the sample is played (beginning at the Start Position)
  • Length knob <50%: Percussive decay envelope is applied to the playback (attack-only envelope if playing Reverse)
  • Length <1%: Tiny grains are played (can be used to sweep through sample file data manually)
  • Reverse button/jack: toggles forward/backwards
  • Bank button: selects channel's bank
  • Reverse+Start Pos button/knob combo allows for setting volume of playback
  • Maximum file size for playback: 4GB per file (6.7 hours per file at 44.1kHz/16b/stereo)
  • microSD Card is hot-swappable when Busy light is off: no power-down required to change cards.
  • Samples that are pre-loaded into memory can continue playing while card is swapped.

File Organization:

Using a computer, the intuitive automatic bank loading features make dragging and dropping your entire sample library a snap. No files need to be renamed. Just create folders and put up to 10 samples in each. If you want a folder to be associated with a particular color of the Bank button, name the folder a color name (such as "Blue - Loops").

  • Ships with a high-speed 16GB microSD card, loaded with hundreds of samples created for 4ms, from musicians such as Richard Devine, Wobbly, Moor Mother, Robert Aiki Aubrey Lowe, Joseph Pailo, Russell E.L. Butler, Hugo Paris & Marc Kate, Paul Barker, Baseck, Animal Collective, Cristian Vogel, Jay E, Marcus Fischer, Chris Carter, Daedelus, Nero Bellum, Anna Sitko, Thomas Fang, Bogdan Raczynski, and more (Sample List)
  • Intuitive bank/color organization system &em no need to rename your wav files
  • Record new samples directly to a bank with the Record Input jacks...
  • ... or drag your folders of sound files onto the microSD card, and each folder will become a bank.
  • Folders starting with a color name will be loaded into that color bank
  • Example "Blue - Frooty Loops" will load into the Blue bank
  • Sub-folders are ignored, only folders in the root directory are scanned for wav files
  • Works best with UHS Speed Class 3 cards with |3| symbol printed on the card

Electrical and Mechanical Specifications:

  • Module Size:
    • 16 HP Eurorack format module
    • 10-pin Eurorack power header
    • 1.1" (28mm) maximum depth with power cable
  • Power consumption:

How much is my shipping?

Shipping is automatically calculated before you submit your payment information. Simply add items to your cart and proceed to the checkout page, where you'll be offered shipping options and their prices. In the UK it's normally around £4 for order values under £150, and free above that. Shipping to mainland EU is typically between £7 and £20, depending on the shipping method and the size and weight of the order.

Do you ship to my country?

Almost certainly - the site will give you an estimate of shipping costs if you add an item to the cart and then enter your country and postcode. If you have specific requirements (such as if you prefer UPS over FedEx, for example) then let us know in advance and we'll try to work something out for you.

Shipping methods

We use a combination of Parcelforce, DPD, Royal Mail and UPS for the UK, and for international orders it's either Royal Mail, UPS, DHL or FedEx depending on where you are in the world. If you have a particular preference then try to let us know BEFORE you order so we can look into it for you. Please note that there may occasionally be additional shipping charges if you live in a remote area, depending on what surcharges are applied by the shipper. We'll get in touch to discuss this with you in such cases.

Dispatch times

For UK orders, we normally dispatch the same working day if we get the order before 15:00. If you have a really urgent situation then of course drop us an email before ordering and we'll always do our absolute best to accommodate you.

For international orders, we normally dispatch the same day if we get the order before 13:00 but again, occasionally it might be the next day before we can send it out, and sometimes FedEx or UPS may come a little earlier than scheduled which would also push an order into the next day.

Shipping times

Since April 2020 the couriers we use have suspended guarantees for shipping times, so even though we're paying them for priority services - 24-48 hours for most of the world - in practice it's often an extra day on top and sometimes it can be longer.

There is absolutely nothing we can do about this unfortunately. If you are outside the UK and it's a life-or-death situation where you absolutely MUST have that passive mult for the next day then... it may be better to find a local supplier.

Saturday shipping

If you're in the UK and you order before 15:00 on a Friday then we can send something for a Saturday delivery (NB: this applies to UK mainland addresses only). The success rate with DPD is about 95% so it's worth a punt most of the time. Please note that if you select Saturday shipping on an order placed earlier in the week, we'll wait until Friday to ship it.

Pre-orders

If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.

If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch if you have questions.

Product Overview

Overview:
The Sampler plays stereo or mono .wav files from an SD Card with controls for Pitch (including a 1V/oct jack), Start Position, and Length.
A knob and CV jack selects the Sample to play, and the Start Position knob and CV jack control where in the sample playback will begin. The Length knob and CV jack determine how much of the sample is played back: from tiny grains, to percussive hits, to longer loops... or just the entire file.
Pressing Play or firing a trigger into the Play Trig jack will play the sample. Holding the Play button down for a second will toggle looping.
There's also a Reverse button and jack for backwards playback, and an End Out jack for synchronizing loops, or cascading sample playback with other events.
If a sample file contains cues (labels or markers), the Start Pos and Length knobs will snap to these cue points.
To record samples, hold Play and Reverse for two seconds. Press Play again or fire a trigger into the Play/Rec Trig jack to start and stop recording. Each recording will create a new stereo 48kHz 24bit .wav file in the current bank's folder. Recordings can be as long as your card has the capacity for: a 256GB card is 18 days of continuous recording (432.9 hours). Audio data is split into maximum 4GB wav files on the microSD card.
Samples are arranged into banks by placing .wav files into folders (each folder is a bank). A maximum of 10 samples can be loaded in a bank. There is a maximum of 60 banks (600 samples maximum total).
Sample files are limited to 4GB each, which is over 6 hours at 44k/16b/stereo.

  • Hundreds of samples included on microSD card
  • Extremely quiet, low noise and low jitter design
  • Stereo or Mono output
  • Play button/trigger jack: Tapping the button or receiving a trigger starts/re-starts the sample
  • Sample CV/knob: select which sample within the channel's bank
  • Pitch CV and Pitch knob: playback pitch (-10 to +4 octave range)
  • Start Pos CV/knob: position in the sample to begin playback (loop start point)
  • Length CV/knob: playback time (loop end point)
  • Length knob at max: entire file is played
  • Length knob 50%-99%: 200ms - 5s of the sample is played (beginning at the Start Position)
  • Length knob <50%: Percussive decay envelope is applied to the playback (attack-only envelope if playing Reverse)
  • Length <1%: Tiny grains are played (can be used to sweep through sample file data manually)
  • Reverse button/jack: toggles forward/backwards
  • Bank button: selects channel's bank
  • Reverse+Start Pos button/knob combo allows for setting volume of playback
  • Maximum file size for playback: 4GB per file (6.7 hours per file at 44.1kHz/16b/stereo)
  • microSD Card is hot-swappable when Busy light is off: no power-down required to change cards.
  • Samples that are pre-loaded into memory can continue playing while card is swapped.

File Organization:

Using a computer, the intuitive automatic bank loading features make dragging and dropping your entire sample library a snap. No files need to be renamed. Just create folders and put up to 10 samples in each. If you want a folder to be associated with a particular color of the Bank button, name the folder a color name (such as "Blue - Loops").

  • Ships with a high-speed 16GB microSD card, loaded with hundreds of samples created for 4ms, from musicians such as Richard Devine, Wobbly, Moor Mother, Robert Aiki Aubrey Lowe, Joseph Pailo, Russell E.L. Butler, Hugo Paris & Marc Kate, Paul Barker, Baseck, Animal Collective, Cristian Vogel, Jay E, Marcus Fischer, Chris Carter, Daedelus, Nero Bellum, Anna Sitko, Thomas Fang, Bogdan Raczynski, and more (Sample List)
  • Intuitive bank/color organization system &em no need to rename your wav files
  • Record new samples directly to a bank with the Record Input jacks...
  • ... or drag your folders of sound files onto the microSD card, and each folder will become a bank.
  • Folders starting with a color name will be loaded into that color bank
  • Example "Blue - Frooty Loops" will load into the Blue bank
  • Sub-folders are ignored, only folders in the root directory are scanned for wav files
  • Works best with UHS Speed Class 3 cards with |3| symbol printed on the card

Technical Specs

Electrical and Mechanical Specifications:

  • Module Size:
    • 16 HP Eurorack format module
    • 10-pin Eurorack power header
    • 1.1" (28mm) maximum depth with power cable
  • Power consumption:

Shipping Details

How much is my shipping?

Shipping is automatically calculated before you submit your payment information. Simply add items to your cart and proceed to the checkout page, where you'll be offered shipping options and their prices. In the UK it's normally around £4 for order values under £150, and free above that. Shipping to mainland EU is typically between £7 and £20, depending on the shipping method and the size and weight of the order.

Do you ship to my country?

Almost certainly - the site will give you an estimate of shipping costs if you add an item to the cart and then enter your country and postcode. If you have specific requirements (such as if you prefer UPS over FedEx, for example) then let us know in advance and we'll try to work something out for you.

Shipping methods

We use a combination of Parcelforce, DPD, Royal Mail and UPS for the UK, and for international orders it's either Royal Mail, UPS, DHL or FedEx depending on where you are in the world. If you have a particular preference then try to let us know BEFORE you order so we can look into it for you. Please note that there may occasionally be additional shipping charges if you live in a remote area, depending on what surcharges are applied by the shipper. We'll get in touch to discuss this with you in such cases.

Dispatch times

For UK orders, we normally dispatch the same working day if we get the order before 15:00. If you have a really urgent situation then of course drop us an email before ordering and we'll always do our absolute best to accommodate you.

For international orders, we normally dispatch the same day if we get the order before 13:00 but again, occasionally it might be the next day before we can send it out, and sometimes FedEx or UPS may come a little earlier than scheduled which would also push an order into the next day.

Shipping times

Since April 2020 the couriers we use have suspended guarantees for shipping times, so even though we're paying them for priority services - 24-48 hours for most of the world - in practice it's often an extra day on top and sometimes it can be longer.

There is absolutely nothing we can do about this unfortunately. If you are outside the UK and it's a life-or-death situation where you absolutely MUST have that passive mult for the next day then... it may be better to find a local supplier.

Saturday shipping

If you're in the UK and you order before 15:00 on a Friday then we can send something for a Saturday delivery (NB: this applies to UK mainland addresses only). The success rate with DPD is about 95% so it's worth a punt most of the time. Please note that if you select Saturday shipping on an order placed earlier in the week, we'll wait until Friday to ship it.

Pre-orders

If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.

If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch if you have questions.