PLEASE NOTE - THE POD RANGE OF CASES ARE VERY, VERY, VERY VERY SHALLOW. Please check that your modules will fit in the case before buying. 4ms also make the PODX range which are slightly deeper (although still shallow compared to most other cases).
The POD range needs an external power brick at 15V - 4ms make a 45W one which does the job or most laptop PC power supplies will do the job if you have one lying around.
4ms Pods are low-cost, portable, compact enclosures that turn Eurorack modules into table-top instruments. Pods come with an integrated, daisy-chainable power supply that allows you to link multiple units in different configurations using only a single power brick.
Each Pod typically will house one or two modules, but three or more can be accommodated using a multi-power cable accessory. Standard M3 threaded holes allow for any configuration of modules.
Pods are available in a variety of widths: 20HP, 26HP, 32HP, and 60HP.
Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!
Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go. The power supply can handle up to 700mA of +12V for the smaller Pods, and 1.4A for the Pod60, which is plenty of juice for even the most hungry modern digital modules.
Pods are a perfect way to get started in Eurorack module, or to add a couple more modules to your monster system. They can even daisy-chain with the 4ms Row Power system, making them a convenient outboard mini-skiff.
The POD range needs an external power brick at 15V - 4ms make a 45W one which does the job or most laptop PC power supplies will do the job if you have one lying around.
Interior dimensions:
- Module depth: 33mm (1.3")
- Module width: 20HP
Power Supply:
- Two 16-pin Eurorack power shrouded headers
- +12V max 0.7A
- -12V max 0.28A
- +5V max 0.2A
- Power input: Two barrel jacks for daisy-chaining
- 1
Product Overview
PLEASE NOTE - THE POD RANGE OF CASES ARE VERY, VERY, VERY VERY SHALLOW. Please check that your modules will fit in the case before buying. 4ms also make the PODX range which are slightly deeper (although still shallow compared to most other cases).
The POD range needs an external power brick at 15V - 4ms make a 45W one which does the job or most laptop PC power supplies will do the job if you have one lying around.
4ms Pods are low-cost, portable, compact enclosures that turn Eurorack modules into table-top instruments. Pods come with an integrated, daisy-chainable power supply that allows you to link multiple units in different configurations using only a single power brick.
Each Pod typically will house one or two modules, but three or more can be accommodated using a multi-power cable accessory. Standard M3 threaded holes allow for any configuration of modules.
Pods are available in a variety of widths: 20HP, 26HP, 32HP, and 60HP.
Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!
Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go. The power supply can handle up to 700mA of +12V for the smaller Pods, and 1.4A for the Pod60, which is plenty of juice for even the most hungry modern digital modules.
Pods are a perfect way to get started in Eurorack module, or to add a couple more modules to your monster system. They can even daisy-chain with the 4ms Row Power system, making them a convenient outboard mini-skiff.
The POD range needs an external power brick at 15V - 4ms make a 45W one which does the job or most laptop PC power supplies will do the job if you have one lying around.
Interior dimensions:
- Module depth: 33mm (1.3")
- Module width: 20HP
